Aspirating Smoke Detection System

Since 2005, Fire Alarm System And Fire Suppression System Manufacturer&Whole Solution Provider

We supply whole fire alarm and suppression system include conventional fire alarm system, addressable fire alarm system, emergency light system, FM200 gas suppression system, fire pump, fire hose reel and cabinet.

Select Language

> Select Language

Home
Products

Fire Alarm System

Fire alarm system plays an important part of the fire and life safety of building and its occupants. Fire alarm system main function is to detect a fire at a sufficiently early stage so that the people who are at risk can made safely either by escaping as fast as possible or extinguishing the fire that can also reduce or prevent the property damage. Therefore, a reliability and functionality of fire alarm system as a whole is very important.

The following are the different types of the Fire Alarm System:

1. Conventional fire alarm system
a. Conventional fire alarm system uses physical cabling to connect several detectors and call points. Conventional fire alarm system has no way to identify immediately the exact location of the fire, but can be arranged in “Zones” to easily identify the location of the cause of the alarm. Its devices are cheaper but will consume more cable wires compare to addressable, since each device will be connected to the control panel by its own cable wire. This system are mainly used specially in smaller property.

2. Addressable fire alarm system

a. Addressable fire alarm system has the same detection principle, except that each detector can be given a set address that can help to identify the exact location of the detector that initiated the alarm, that can be seen in the fire alarm control panel. Addressable fire alarm system saves a lot of wire compare to conventional system, since the devices can share one cable wires up to the last device. Both ends of the wire is loop connected to the fire alarm control panel. This system are very suitable for large and high buildings, since they are able to pinpoint exactly which devices are triggering the alarm.

3. Wireless fire alarm system

a. Wireless fire alarm system, is hassle-free to install compare to conventional and addressable since it does not use any conduit and cable wires. However, even though you saved a lot of money in material and labor cost, the hardware and programming are higher than the wired systems. The devices are battery powered and can be placed anywhere and can be easily relocate if needed.

Fire Alarm System Components
The main component of fire alarm system are the following:

1. Fire Alarm Control Panel

Fire Alarm Control Panel is the brain or central hub of a fire alarm system. It displays the location and status of the alarm devices, and it gives precise location of the device that cause the alarm.

2. Fire Alarm Initiating Devices

Fire Alarm Initiating Devices are the devices that detects signs of fire and triggers the alarm. They are connected to the fire alarm system control panel. Initiating devices includes smoke detectors, heat detectors, flame detectors, manual pull station and fire sprinkler water flow switch.

3. Fire Notification Devices
Fire Notification Devices are the audible and visual devices in fire alarm system, it includes fire alarm horn, speaker and bell. Its main function is to alert people at risk in the event of a fire, that is why it is considered as the most important components of fire alarm system.

4. Primary Power Supply
Primary power supply is typically supplied by the local utility, and also from generators that are located in remote areas wherein the electrical grid is not available.
5. Backup Power Supply
Backup power supply commonly supplied by batteries and stored internally or adjacent to main fire alarm control panel or can be also from generator. It must also provide a 24 hours of power supply to control panel in case of power shortage.

How Fire Alarm System Works?

In an event of a fire emergency, the fire alarm system main role is to detect fire and to alert people at risk inside the building and emergency response team to control the situation as fast as possible. Fire alarm system key functions is to detect (by the use of smoke detectors, heat detectors, flame detectors, etc.) , alert (by the use alarm horn, speaker, and bell), and monitor (control panel).

Fire Alarm System Maintenance
A functioning and well-maintained fire alarm devices can help reduce injuries, save lives and properties. The fire safety systems inspection, routine maintenance, and testing will help one in keeping in compliance with the local/state fire inspectors and also their insurance carrier. To keep the best condition of the fire alarm devices, it is advisable to keep a scheduled maintenance and check the following:

1. Checking of physical appearance of the fire alarm devices

2. Smoke Detectors should be cleaned & tested for sensitivity levels (addressable type)

3. Fire alarm control panel should be tested for all alarm, trouble, supervisory, reset & silence function

4. Checking of the devices power supply

5. Checking/ replacement of batteries

6. Checking/ removal of any obstruction on the devices that may cause false alarm or malfunctioning

7. Checking if the alarm is audible

8. Devices must be replaced when exceeded 10 years from the manufactured date

Emergency system

ASENWARE Centralized Monitoring Emergency Luminaire System is designed for managing, monitoring and controlling emergency lights automatically.

Fire Suppression System

ASENWARE Fire Pump Series provide fire departments or private users with the ability to pump from any water source.

Fire Fighting System

At ASENWARE, you can choose the best quality of fire fighting equipment like extinguisher, hose reels, fire monitors, nozzles and hose pipes.
Project
Newsroom
About Us

Contact us

Factory

Technical RFQ
Contact
Technical FAQ

Aspirating smoke detection sys...

Home > Products > Aspirating smoke detection system

Aspirating Smoke Detection System AW-AS100

The Aspirating Smoke Detection System is an extremely early smoke detection device that collects air samples through air sampling tubes and analyzes the concentration of smoke particles in air samples...

INQUIRY

The Aspirating Smoke Detection System is an extremely early smoke detection device that collects air samples through air sampling tubes and analyzes the concentration of smoke particles in air samples to provide alarms according to the set value.

Aspirating Smoke Detection System working principle

The AW-AS100 aspirating smoke detector uses laser cavity detection technology to detect fine smoke particles released early in the combustion of substances. When the substance is burning, the number of smoke particles in the air increases sharply, and the AW-AS100 aspirating smoke detector samples the air sample to the detection core, and uses the principle of "shading rate" to detect light diffraction through the laser cavity, accurately reflecting the change trend of fire smoke. When the light derivation rate reaches the set threshold, Micro Know will issue an alarm and notify the fire duty personnel in time, so as to win more time for people to deal with fire hazards.

The Aspirating Smoke Detection System has a wide range of applications and is suitable for the following applications:
- Airport
- Rail Transit
- Stadiums
- Warehouse
- Logistics
- Communication Room Cabinet
- Power System Equipment Inside
- Internet Data Center
- Electronics
- Pharmaceuticals
- Hospitals
The apirating smoke detection system is mainly composed of detector AW-AS100, sampling pipeline and background monitoring software, as shown in the following figure:

Aspirating Smoke Detection System Features:

Sensitivity: The AW-AS100 aspirating smoke detector is extremely sensitive to detect small smoke particles in the early stage of combustion and early detection of early fire hazards.

Accurate and no false alarm: The AW-AS100 adopts the principle of laser cavity detection and is extremely accurate in monitoring smoke particles.

Low maintenance costs: Avoid adding consumables such as water or expensive filters. The system has a built-in high-efficiency compression pump that enables self-cleaning.

Large detection area: The theoretical value of the detection area of each double-tube detector can reach 1000 square meters

Smoke content visualization: After the intelligent terminal connects the device, it can view the smoke content waveform of the device, so that people can intuitively feel the current smoke situation and facilitate timely adjustments.

Easy to operate: You can enter by scanning the code through the intelligent terminal,without the need to operate and set it through the keys, which provides users with great convenience.

Multi-level alarm function: divided into five alarm stages, namely alarm, early warning, patrol, fire alarm 1, fire alarm 2. The parameter values at each stage can be set according to customer needs, which is convenient for users to adjust parameters on site.

A variety of quick settings: There are quick setting options for smoke sensitivity,which is convenient for on-site personnel to adjust.

Parameter customization function: Can be run according to the customer's custom parameters.

Self-learning function: Periodically collect the surrounding environmental conditions for automatic analysis, automatically adjust the appropriate parameters, and facilitate customer use.

Special alarm input: Through the external signal, the micro-know can be used to perform the alarm parameters set by the customer.

Historical alarm query function: 30,000 historical alarms can be saved.

Event recording function: Can save on-site operation records for background query.

Black box function: When the equipment fails, it can keep a record of all the setting parameters and operating parameters at the last moment for the customer to locate the event.

Aspirating Smoke Detection System Sampling Lines/pipe:

Sampling pipeline is used to collect air samples in various regions, sampling pipeline system is composed of sampling tube, elbow, tee, plug, capillary sampling tube and sampling head, etc., the common pipeline sampling methods are as follows

Brand Name	Asenware
Model Number	AS100
Special Features	Aspirating Smoke Detector System
Battery lifetime	Cloud Chamber Fire Detection System
Operating voltage	DC24V
Operating Power	18W
Level of Protection	IP30
Alarm Level	5 levels
Max Event Recording	3200pcs
Color Touch Screen	Led indicator 5-inch/7-inch
Vacuum Blower Speed	Adjustable
Sampling Air Filter	Two levels of filtration
Protection area	50-2000㎡
Product name	Very Early Cloud Chamber Fire Detection System