Asenware AW-D101 smoke detector is an intelligent smoke detector, which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (devices) can be given specific ID, which allows the panel to continuously monitor specific detector location (point). It reduces the maintenance cost and makes it easier to maintain the system.

 

Addressable Smoke Detector features:

• Addressable-analog communication
• Low standby current for continuous
monitoring (≤2.5mA)
• Two-wire connection
• Two LEDs (RED), blinks in normal condition
and becomes stationary during fire
• Remote test from Panel

Spacing
Spacing of detector must be followed by standard EN 54 or NFPA 72. NFPA 72
suggests for low airflow application spacing of 9.1 m for ceiling height up to 3.15 m can
be applicable. However, please follow the specific codes and local codes for specific
applications.

Addressable Smoke Detector Technical parameters:

Model No.	AW-D101
D/C	1712
Operating Voltage Range	18V-28VDC
Alarm Current	≤3mA
Work Current	≤2.5mA
Temperature	-10℃ to 50℃
Smoke Sensitivity	0.1-0.15 dB/m
Standard Number Ref	EN 57-7:2000
Size	99.80mm
Terminals Connection	No 6: Remote Indicator+ No 3: Remote Indicator-
	No 2: Loop IN+  No 5: Loop IN-

smoke detector installation smoke detector placement

AW-D101 addressable detector use a separate base to simplify the installation and
maintenance. For proper installation, terminal connections to be followed as shown
below