Conventional Fire Alarm Control System LPCB Approved
Battery standalone smoke detector AW-SSD606D
The detector is a photodetector that uses the most advanced optical sensing chamber. The detector is designed to provide open area protection.
Product overview
A bi-color LED on each detector provides a local 360° visible alarm indication. They flash once every minute to indicate that power is on and the detector is working properly. The red LED flashes when the alarm occurs. When there is a fault condition indicating that the detector sensitivity is outside the listed limits or the battery is low, the yellow LED will flash. The alarm can be reset by pressing the button or when the fire alarm is not collected for a long time.
The test button is used to test whether the detector works normally; each time the buzzer is pressed, the buzzer will respond with a drop, while the yellow LED flashes; This button can be used for local silence during fire alarms;
smoke detector
Product Features
-  High adaptability to the ambient,with dustproof,mothproof,moisture proof and anti-white light function

-  Sound & Flash Alarm,low voltage indication,self-test Function

-  Manual test,Auto reset Function.

Technical parameters
Working power: A CR17335/17450 lithium manganese battery  B 2* AA alkaline battery 
Current:     ≤8µA@3VDC
Maximum Alarm Current (LED on):  ≤100mA@3VDC
Operating Humidity Range: ≤95%RH(40°C±2°C) 
Operating Temperature Range: -10°C to 50°C (14°F to 122°F)
Smoke Alarm Sensitivity:     0.18-0.26dBM
Alarm level:      ≥85db /3m

 
            
  
 

Download
BACK