The AW-D305 Addressable manual call point ( hereinafter referred to AW-D305 Addressable) is mainly designed to be used with an intelligent two-bus control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the coded address and the equipment status of the manual fire call points. When the manual fire call points is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit. The AW-D305 Addressable supports electronic coding, more suitable for engineering application convenient.

How To Wire Addressable manual Call Point

Addressable Manual Call Point features：

Addressable Manual Call Point Technical Parameters：

Operating Voltage	Signal Loop 24V(18V～28V) Power 24VDC(20VDC～28VDC)
Standby Current	Loop＜0.8mA ; Power＜2mA
Action Current	Loop＜5mA ; Power＜15mA
Output Capacity	1A@DC30V
Input Mode Setting	NC or NO input mode can be set by the jumper JP4.
Programming Method	Electronically addressed
Code Range	One address within 1~324.
Indicators	Inspection indicator: l blink once about every 12 seconds in the inspection status or remain lit in the output status; Input indicator : remain lit in the feedback status.
Operating Temperature	-10℃～+55℃
Relative Humidity	≤95% , non-condensing
Material of Enclosure	ABS
Dimension (L×W×H)	86mm×86mm×41mm (with base)
Mounting Hole Distance	60.5mm
Weight	About 148g (with base)
Operating Voltage	Signal Loop 24V(18V～28V) Power 24VDC(20VDC～28VDC)