Addressable Fire Alarm Control System LPCB Approved
LPCB Addressable fire alarm system 32 zone control panel AW-FP300
The purpose of the AW-FP300 Fire Alarm Control Panel (FACP) is to monitor input signals, give indications and possibly activate outputs as programmed. It is designed to comply with EN 54-2 with qualities of simple installation, operation and easy maintena
Product overview
The fire alarm control panel is an important part of the fire alarm system. It is mainly used to receive, display and transmit fire alarm signals, and has the function of issuing control signals.
The main functions of the fire alarm control panel are system power supplying, fire alarm signal receiving, and equipment linkage.
 
1.System Power Supplying
The fire alarm control panel can provide a stable power supply for external devices such as smoke detectors. Meanwhile, it can also monitor the working status of external devices and the system itself.
 
2.Fire Alarm Signal Receiving
The fire alarm control panel can receive, convert, and process the fire alarm signal output from the detectors, giving sound and light alarms, indicating the specific location and time of the fire alarm, and recording the alarm information.
 
3.Equipment Linkage
The fire alarm control panel can activate the fire alarm signal through the fire alarm sending device or activate the automatic fire extinguishing equipment and linkage control equipment through the automatic fire extinguishing control device.
32 zone Addressable Fire Alarm Control Panel
Therefore, we can see that the main functions of the fire alarm control panel are to provide a high-stability DC power supply to the fire detectors, to monitor whether the transmission wires connecting the fire detectors are faulty, and to receive the fire alarm signals sent by the fire detectors. It can convert and process the fire alarm signals, giving out sound and light warnings, then activating the fire-fighting equipment.
 
The purpose of the AW-FP300 Fire Alarm Control Panel (FACP) is to monitor input signals, give indications and possibly activate outputs as programmed. It is designed to comply with EN 54-2 with qualities of simple installation, operation and easy maintenance.
The AW-FP300 Fire Alarm Control Panel is an addressable fire detection panel with 1 loop of 324 addressable points and expansion capabilities. It is compatible with other peripherals made by ASENWARE with its own protocol.
Product Features

Addressable fire alarm system AW-FP300 Features:


The AW-FP300 single loop 32 zone fire alarm control panel offers the following features: 
1. Up to 324 addresses on one loop
32 zone Addressable Fire Alarm Control Panel
2. An easy to read, 4.3'' color screen LCD with a resolution of 480×272
3. Zone indication and control panel(ZCP) for 32 zones gives a quick indication of the location of an alarm
4. Record capacity of 1000 historical events for each of historical fire, historical fault and historical operation
5. An independently programmable conventional sounder circuit output
6. Integral power supply and battery
7. Integral printer
Addressable Fire Alarm Control Panel Integral printer
8. Flexible and intuitive cause and effect programming on front panel
9. Zone test, point test and module start/stop testing facilitate the commissioning
10. U-disk interface makes the load and save of configuration or historical data convenient for system commissioning and maintenance
11. Hierarchy management with three access levels 
12. Anti-tamper protection by a key lock
13. CAN bus for interconnection of up to 20 FACPs and RS485 for connection with up to 30 fire indicating panels per FACP
 
Technical parameters

Addressable fire alarm control panel Technical parameters:

 Power supply 
Mains supply  230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A 
Mains fuse  T3.15AL250V 
Operating voltage  18.5 ~ 30VDC 
Recommended mains cable  Screened or standard/black mains cable, cable size 0.75mm2 
Power rating  Imax.a=1.2A; Imax.b=2.6A; Imin=0.65A 
Max. charging current  1.2A 
Max. battery supply current  4A (when the Mains is disconnected) 
Battery capacity, type and recommended model  Max. capacity 2×12V/17Ah; Min. capacity 2×12V/12Ah 
VRLA. PS-12170 for 17Ah (Power-sonic), PS12120 for 12Ah (Power-sonic) 
Max. internal resistance of battery  1.5Ω
Battery fuse  F8AL250V 
Recommended battery cable  14AWG 
Quiescent current (full loaded)  < 0.4A 
Outputs 
S.C. Out (+, -)  Output voltage  18.5 ~ 30VDC 
Max. output current  0.5A 
Fuse rating  F1AL250V 
End of line resistor  4K7 
Recommended type of cable  Plain unscreened cable, 1.5mm2 
Cable diameter  1mm2 ~2mm2 
Transmission distance  ≤1500m 
Max. number of sounders @50mA  20 
F.P.E. Out (+, -) 
F.A. Out (+, -) 
Output voltage  18.5 ~ 30VDC 
Max. output current  0.5A 
Fuse rating  F1AL250V 
End of line resistor  4K7 
Recommended type of cable  Plain unscreened cable, 1.5mm2 
Cable diameter  1mm2 ~2mm2 
Transmission distance  ≤1500m 
Fault Out 
(NC, COM, NO) 
Contact capacity  30VDC@2A, 125VAC@0.5A 
Recommended type of cable  Plain unscreened cable, 1.5mm2 
Cable diameter  1mm2 ~ 2mm2 
24VK (+, -)  Output voltage  18.5 ~ 30VDC 
Max. output current  0.6A 
Fuse rating  F1AL250V 
Recommended type of cable  Plain unscreened cable, 1.5mm2 
Cable diameter  1mm2 ~2mm2 
Input 
Class change (+, -)  Input mode  Passive 
Cable resistance  ≤500Ω
Recommended type of cable  Plain unscreened cable, 1.5mm2 
Cable diameter  1mm2 ~2mm2 
Loop 
Loop Out (+, -) 
Loop In (+, -) 
Output voltage  16.5 ~ 30VDC, pulse 
Output current  0 ~0.3A 
Loop type  Class A 
Recommended type of cable  Screened or unscreened twisted-pair, 1.5mm2 
Transmission distance  ≤1000m 
Cable diameter  1mm2 ~2mm2 
Network communication 
RS-485  Max. number of FIPs  30 
Transmission rate  9600 bps 
Recommended type of cable  Screened or unscreened twisted-pair, 1mm2 
Transmission distance  ≤1000m 
Cable diameter  1mm2 ~5mm2 
CAN  Max. number of panels  20 
Transmission rate  Optional: 10K, 20K, 50K and 100K bps 
Recommended type of cable  Screened or unscreened twisted-pair, 1mm2 
Transmission distance  ≤1000m 
Cable diameter  1mm2 ~5mm2 
Physical dimensions 
Approx. Dimensions of the panel (W×H×D)  430×560×170mm 
Approx. weight (without battery)  14kg 
Operating conditions 
Temperature range: 0°C~45°C; Max relative humidity: 95% (40°C ±2°C, no condensation) 

Addressable fire alarm control panel  Wiring diagram
Download
BACK