Since 2005, 16 Yeares Fire Alarm and Suppression System Manufacturer&Whole Solution Designer
We supply whole fire alarm and suppression system include conventional fire alarm system, addressable fire alarm system, emergency light system, FM200 gas suppression system, fire pump, fire hose reel and cabinet.
  • Home
  • Products
    ASENWARE Fire Alarm Control System are intelligent system which are designed to make it suitable for most of applications. It’s user friendly functionality makes it suitable to program and configure the devices. 7 ” touchscreen display gives the information for fire alarm, trouble , supervisory and other related information all the
    time.This system fully complied with the requirement of EN 54-2 and EN 54-4.
    ASENWARE Fire Pump Series provide fire departments or private users with the ability to pump from any water source.
    The AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 24 standard. 
    ASENWARE Centralized Monitoring Emergency Luminaire System is designed for managing, monitoring and controlling emergency lights automatically. 
    Asenware FP300 series is a LPCB addressable fire alarm system with one loop of 324 addressable points, comply with EN 54 standard.
    ASENWARE fire fighting telephone system is the special communication equipment for fire fighting
    ASENWARE Heat Detector is photo-electronic detector using a state-of-the-art optical sensing chamber. 
  • Project
  • Newsroom
  • About Us
  • Contact
LPCB approved addressable fire...
Home > Products > LPCB approved addressable fire alarm control system
LPCB Addressable Fire Alarm Strobe Sounder Beacon AW-D306 for fire alarm system
AW-D306 Addressable Sounder Beacon can give audible and visual alarms after being connected to a DC24V power supply and a bus loop. It can be used with a bus-type fire alarm control panel. After recei...
  • AW-D306 Addressable Sounder Beacon can give audible and visual alarms after being connected to a DC24V power supply and a bus loop. It can be used with a bus-type fire alarm control panel. After receiving a start command given by the fire alarm control panel following an accident, the Sounder Beacon will begin to work. At this moment, the Sounder Beacon will give a dazzling visual alarm signal and a harsh audible alarm signal ,to remind the persons on the scene of the accident , the fact that a fire has occurred on the site ,quickly and necessity to take related evacuation measures, thus preventing the fire accident from becoming a major one.
    The Sounder Beacon may be used to give audible alarms and visual alarms at the scenes of accidents.It is applicable to places like high-rise residential buildings, public places, hotels, amusement buildings, factories, shopping centers, hospitals, schools, office buildings and stock exchanges, and particularly to the places with a low visibility or the possibility of generation of smoke.
  • Strobe Sounder Beacon features:

    1. Meet both EN54-3 and EN54-23.
    2. Designed with an upper cover and a lower cover and installed on an independent base, it can be installed,debugged and maintained conveniently.
    3. Suitable for wall and ceiling mount application.
    4. Providing 16 tones.
    5. Highly efficient LED technology
  • Strobe Sounder Beacon Technical parameters:

    Loop input DC24V(18-28V),≤1mA(monitoring status),≤3mA(alarm status)
    Power input DC24V(20-28V),≤4mA(monitoring status),≤130mA(alarm status)
    Power consumption ≤3.2W@DC24V
    EN54-23 Coverage C-3-8/W-2.4-6(coverage volume see the following figures)
    Flash Color and
    White, 0.5Hz
    Light Output
    Meets EN54-23
    Sound Level See the following table”Sound Level Data”
    Ingress Protection
    Operating Temperature -10℃ ~ +50℃
    Relative Humidity ≤95%, non condensing
    Material of Lens/Body Flame retardant PC/ABS
    Dimension ф100mm×100.5mm( with the base)
    Mounting Hole Spacing 45mm ~ 70mm
    Weight About 270g (with the base)
    Loop input DC24V(18-28V),≤1mA(monitoring status),≤3mA(alarm status)